Printing from the Mac

If you are at NTE, FHS or Extended Campus - all printers have changed as of July 2014

  1. Be sure you have installed Printer Manager from Self Service (Printing 1 of 2 ), then reboot.
  2. Go into system preferences >Print and Scan and delete all existing printers from NTE, FHS or Ext Campus. You do this by highlighting the printer and clicking the “-” button at the bottom of the printer box.
  3. Go into Self Service and click on Printing 2 or 2 (FHS, NTE and Ext Campus will all say New as of July 2014) and find what you want to install.
  4. You will need to set a default printer go to System Preferences >Print and Scan >Default Printer (near the bottom)

Never added printers?

  1. Open Self-Service
  2. Click on the category ‘Printing 1 of 2’ to install the Ecopy, HP software and Printer Manger (then reboot)- this only has to be done once.
  3. Click on ‘Printing 2 of 2’, then select the the printer (s) you would like to have. Note most schools have ALL in one job.
  4. You will need to set a default printer go to System Preferences >Print and Scan >Default Printer (near the bottom)

Each time you print, you will have to enter your network username and password.

 

Have more questions? Submit a request

0 Comments

Please sign in to leave a comment.
Powered by Zendesk